Chapter 4 - Terminals and Optional Equipment
4.
5.
6.
7.
4 - 62
Press the handset cradle release tab towards the cradle.
Figure 4-34: ATTACHING THE PSA
Slide the handset cradle away from the terminal and remove the connecting cable from the
terminal unit connector.
Plug in the cradle connecting cable of the PSA-R handset into the terminal unit connector.
Insert the tab on the PSA-R into the slot on the terminal base.
The cradle connecting cable should be set into the groove to prevent it from being
●
pinched during the installation.
Figure 4-35: CONNECT THE PSA
Chapter 4