NEC ux5000 Hardware Manual page 244

Hide thumbs Also See for ux5000:
Table of Contents

Advertisement

Chapter 4 - Terminals and Optional Equipment
8. Follow the feature programming as described in the UX5000 Feature Manual (P/N 0913201).
ESIU Blade
CN1
CN2
CN3
4 - 26
CN2 or CN3
To 8/16
PGDAD Module
Figure 4-16: 2PGDAD CABLE CONNECTION
The 2PGDAD module provides amplifiers for each page output port (for a
maximum of +8 dBM, 600 ohms at 1KHz). No additional page amplification is
provided by the 2PGDAD module and, if required, an external page amplifier
can be used for additional amplification.
The page output of the CCPU does not provide any amplification (for a
maximum output of -3 dBm, 600 ohms at 1KHz). If the paging volume is not
satisfactory using the CN8 or CN9 connector on the CCPU, it is recommended
that the 2PGDAD module be used instead.
External Page
Page Control
External Relay
AC 117V
Relay 8
Relay 7
Relay 6 - for CN3
Relay 5 - for CN2
Chapter 4

Advertisement

Table of Contents
loading

Table of Contents