Installing The Long-Term Battery Box - NEC ux5000 Hardware Manual

Hide thumbs Also See for ux5000:
Table of Contents

Advertisement

1.6.2.1

Installing the Long-Term Battery Box

1.
2.
Figure 1-31:
3.
Chapter 1
Position the floor-mount box in a location which provides enough access around the unit to
allow for access to the equipment. Secure the box with 4 10mm anchor bolts.
Place the long-term battery box on top of the floor-mount box. Secure the unit by attaching the
upper joint brackets to either side of the battery box and floor-mount box. Four screws total on
each bracket are used - two screw into the battery box and two screw into the floor-mount box.
MOUNTING BATTERY BOX TO FLOOR MOUNT BOX
Remove the screw on the right side of the front cover of the battery box. Slide the cover to the
right slightly and remove it.
Figure 1-32:
REMOVE FRONT COVER OF BATTERY BOX
Chapter 1 - Installing the Chassis
1 - 25

Advertisement

Table of Contents
loading

Table of Contents