S
4-3
ECTION
BACKGROUND MUSIC
4.3.1
Installing Background Music (Figure 4-9)
Background Music (BGM) sends music from a customer-provided music source to speakers in keysets. If an
extension user activates it, BGM plays whenever the user's extension is idle.
1. Connecting to the CCPU:
Connect a sub-mini jack into the CN8 or CN9 connector on the CCPU to the appropriate location on the
extension cross-connect block.
2. Connect the two-conductor station cable from the cross-connect block to the external music source.
3. Install bridging clips as required.
4. Define the programming in 10-21-04 and 10-21-05 for the Background Music connection.
Fast Ethernet CN7
BGM/EXSP
Control Relay CN10
Status LED1
Status LED2
Status LED3
Status LED4
Status LED5
Serial CN6 (special use)
Aux In/Out BGM/EXSP
Control CN8
Aux In/Out BGM/EXSP
Control CN9
Refer to Background Music in the software manual for additional programming options and information.
✎
Chapter 4
SW6
USB CN5
Load/SW1
Figure 4-9: CCPU CONNECTIONS
Chapter 4 - Terminals and Optional Equipment
Battery
CN3
CN1
CN2
CN4
MEMDB
VOIPDB
Gbit Ethernet
<VOIPDB>
4 - 9