Table of Contents
Advertisement
Figure 122. Removing the sensor board cover
Next steps
Install the sensor board cover.
Related links
Safety instructions
Installing the sensor board cover
Installing the sensor board cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1.
With the latch facing up, slide the latch into the hard drive bay.
2.
Push the the sensor board cover with a slight inclination into the bay until the the sensor board cover clicks into place.
174
Advertisement
Table of Contents
Troubleshooting
