Table of Contents
Advertisement
Item
2
3
4
5
6
7
8
16
Indicator, Button, or
Connector
Universal Serial Bus (USB port)
Quad Small Form-factor
Pluggable (QSFP port)
Ethernet port
iDRAC Enterprise management
port
Micro Universal Serial Bus
(USB port)
VGA port
Power button/power-on
indicator
Icon
Description
NOTE: PSU's with
different wattages
cannot be mixed.
Use the USB 3.0 port to
connect USB devices to the
system. This port is a 9-pin,
USB 3.0 compliant port.
Mellanox ConnectX-4 VPI
EDR / 100 GbE Embedded
Port (optional)
Single Port 1Gb LOM Ethernet
port
Use the iDRAC8 Enterprise
management port to remotely
access iDRAC. For more
information, see the Integrated
Dell Remote Access Controller
User's Guide at Dell.com/
idracmanuals.
Use the port to connect the
system to a host.
Use the video/VGA port to
connect a display to the
system. For more information
about the supported
video/VGA port, see the
Technical specifications
section.
The power-on indicator glows
green when the system power
is on.
The power-on indicator turns
amber when there a critical
system event occurs.
The power button controls the
PSU output to the system
board.
NOTE: When turning on
the system, the video
monitor can take from
several seconds to over
two minutes to display
an image, on the basis of
the disk space available
in the system.
Advertisement
Table of Contents
Troubleshooting
