Dell PowerEdge C6320p Owner's Manual page 120

3. Remove the sled from the enclosure.
4. Remove the expansion card riser assembly.
5. Keep the Phillips #1 screwdriver ready.
Steps
1. Remove the screws that secure the mezzanine card filler bracket to the sled.
2. Lift the mezzanine card filler bracket out of the sled.
Figure 67. Removing a mezzanine card filler bracket
Next steps
1. Install the mezzanine card or the mezzanine card filler bracket.
2. Install the expansion card riser assembly.
3. Install the sled into enclosure.
4. Follow the procedure listed in the After working inside your system section.
120