Dell PowerEdge C6320p Owner's Manual page 43

System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and the BIOS
version.
Related links
System Information details
System BIOS
Viewing System Information
Viewing System Information
To view the System Information screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
Related links
System Information
System Information details
The System Information screen details are explained as follows:
Option Description
System Model Specifies the system model name.
Name
System BIOS Specifies the BIOS version installed on the system.
Version
System Specifies the current version of the Management Engine firmware.
Management
Engine Version
System Service Tag Specifies the system Service Tag.
System Specifies the name of the system manufacturer.
Manufacturer
System Specifies the contact information of the system manufacturer.
Manufacturer
Contact
Information
System CPLD Specifies the current version of the system complex programmable logic device (CPLD) firmware.
Version
UEFI Compliance Specifies the UEFI compliance level of the system firmware.
Version
Related links
System Information
System Information details
Viewing System Information
43