Installing The Riser Card - Dell PowerEdge C6320p Owner's Manual

5. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a sled
Removing the expansion card riser assembly
Removing an expansion card

Installing the riser card

Installing an expansion card
Installing the expansion card riser assembly
Installing a sled
After working inside your system
Installing the riser card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the sled from the enclosure.
4. Remove the expansion card riser assembly.
5. If installed, remove the expansion card.
6. Keep the Phillips #2 screwdriver ready.
Steps
1. Place the riser card into the expansion card bracket.
2. Replace the screws that secure the riser card to the expansion card bracket.
Figure 58. Installing the riser card
109