Table of Contents
Advertisement
Figure 48. Installing the processor bracket
3.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
4.
Use the thermal grease syringe included with your processor kit to apply the grease in a spiral quadrilateral design on the top of
the processor.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating
the processor socket.
NOTE: The thermal grease syringe is intended for single use only. Dispose of the syringe after you use it.
97
Advertisement
Table of Contents
Troubleshooting
