Table of Contents
Advertisement
Connecting the fabric cable to the processor
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove the sled from the enclosure.
4.
Remove the air shroud.
Steps
1.
Align the notches on the fabric connector with the guide pins on the processor base plate.
2.
Push the fabric connector toward the processor, till it locks into place.
3.
Push the locking bar down to secure the fabric connector.
Figure 37. Connecting the fabric connector
85
Advertisement
Table of Contents
Troubleshooting
