Intelimonitor; Winscope; Websupervisor - ComAp InteliCompact NT Reference Manual

2.2.2

InteliMonitor

PC Monitoring tool for Inteli controllers. See more in the
InteliMonitor Reference Guide.
This tool provides the following functions:
- Online monitoring of a controller or whole site
- Fully customizable SCADA diagram
- Reading/writing/adjustment of setpoints
- Reading of measured values
- Browsing of controller history records
2.2.3

WinScope

Special graphical controller monitoring software. See
more in the WinScope Reference
This tool provides the following functions:
Monitoring and archiving of ComAp controller's
-
parameters and values
- View of actual/historic trends in controller
On-line change of controllers' parameters for
-
easy regulator setup
2.2.4

WebSupervisor

Web-based system for monitoring and controlling ComAp controllers. See more at the
webpage.
This tool provides the following functions:
- Site and fleet monitoring
- Reading of measured values
- Browsing of controller history records
- On-line notification of alarms
- E-mail notification
- Also available as a smartphone application
NT
InteliCompact , SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
guide.
WebSupervisor
11