Exercise Timers - ComAp InteliCompact NT Reference Manual

Available Nominal Power
N :
OTE
The contents of the history log will be deleted after programming firmware or configuration into the
controller.
The history log can be displayed on the
in LiteEdit, it will also contain the history log. The archive can be later opened in offline mode to view
the history log offline.
N :
OTE
The first history record after the controller is switched on, programmed or a watchdog reset occurs
contains diagnostic values instead of operational values. Some fields in these records may seem to
have nonsense values. Do not take these values into account.

6.16 Exercise timers

There are two exercise timers available in the controller, which are based on the RTC clock. They are
both identical.
Each timer has the following settings (in the
NT
InteliCompact , SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
APN Available nominal power
controller screen or in LiteEdit. If an archive (*.ail file) is saved
Date/Time setpoint group).
121