ComAp InteliCompact NT Reference Manual page 172

Setpoint: APN UserName
Group Comms Settings
Range [units] [-]
Related All
applications
Description User name for APN access point provided by GSM/GPRS operator.
Setpoint: APN UserPass
Group Comms Settings
Range [units] [-]
Related All
applications
Description User password for APN access point provided by GSM/GPRS operator.
Setpoint: AirGate
Group Comms Settings
Range [units] DISABLED / ENABLED [-]
Related All
applications
Description This setpoint selects the Ethernet connection mode.
DISABLED:
This is a standard mode in which the controller listens to the incoming traffic
and answers the TCP/IP queries addressed to it. This mode requires the
controller to be accessible from the remote device (PC), i.e. it must be
accessible at a public and static IP address if you want to connect to it from
the internet.
ENABLED:
This mode uses the "AirGate" service, which hides all issues with
static/public address in a black box and you do not need to do anything
about it. You need only a connection to the Internet. The AirGate server
address is adjusted by the setpoint AirGate IP.
Setpoint: AirGate IP
Group Comms Settings
Range [units] [-]
Related All
applications
Description This setpoint is used for entering the domain name or IP address of the
AirGate server. Use the free AirGate server provided by ComAp at
airgate.comap.cz if your company does not operate its own AirGate server.
NT
InteliCompact , SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
172