Installation; Mounting; Package Contents - ComAp InteliCompact NT Reference Manual

3 Installation

3.1

Mounting

The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm.
Use the screw holders delivered with the controller to fix the controller into the door as described in the
pictures below. Recommended tightening torque is 0,15 – 0,2 Nm.
3.2

Package contents

The package contains:

Controller

Mounting holders

Terminal blocks
N :
OTE
The package does not contain a
separately.
NT
InteliCompact , SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
communication module. The required module should be ordered
14