ComAp InteliCompact NT Reference Manual page 255

Binary output: Horn
Related All
applications
Description The output designed to be used for acoustic indication of a newly appeared
alarm. The output is activated each time a new alarm has appeared and
remains active until one of the following events occurs:



Binary output: Fault Reset
Related All
applications
Description The output is a copy of Fault Reset button on controller and binary input
FaultResButton.
Binary output: GCB Close/Open
Related All
applications
Description This output is to be used for a contactor control in case a contactor is used
in the GCB position. See the chapter
outputs available for generator/mains power switches.
Binary output: GCB ON Coil
Related All
applications
Description This output is to be used for control of the ON coil of the generator circuit
breaker. See the chapter
available for generator/mains power switches.
Binary output: GCB OFF Coil
Related All
applications
Description This output is to be used for control of the OFF coil of the generator circuit
breaker. See the chapter
available for generator/mains power switches.
Binary output: GCB UV Coil
Related All
applications
Description This output is to be used for opening the generator circuit breaker via the
undervoltage coil. See the chapter
outputs available for generator/mains power switches.
NT
InteliCompact , SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
Fault reset is pressed
Horn reset is pressed
Horn Timeout has elapsed
Circuit breakers
Circuit breakers
Circuit breakers for details about all
for details about all outputs
for details about all outputs
Circuit breakers for details about all
255