Boot Operation - Mitsubishi Electric L02SCPU User's Manual And Reference

2.9

Boot Operation

CPU modules can be operated according to the program and parameters stored in an SD memory card. Operating a
CPU module by reading out (boot) those data are called boot operation. The files that can be booted are as follows.
File type
Parameter
Program
Device comment
Device initial value
Symbolic information
*1 The intelligent function parameter is included.
*2 This is the data of label program configuration information.
GX Works2 Version 1 Operating Manual (Common)
Remark
The L02SCPU and L02SCPU-P do not support the boot operation.
(1) Executing a program
The programs specified in the Boot File tab are booted to the program memory when:
• the CPU module is powered off and then on or
• the CPU module is reset.
(a) Boot operation procedure
1.
Create a program.
2.
Configure the setting for a boot operation.
Specify the file name and transfer destination to boot.
Project window  [Parameter]  [PLC Parameter]  [Boot File]
74
Boot source
*1
SD memory card
*2
: Bootable, : Not bootable
Boot destination
Program memory





Standard ROM




