Role Default-Role Enable; Role Feature-Group - HP FlexFabric 12900 series Command Reference Manual

Related commands
display role
•
interface policy deny
•
• rule
vlan policy deny
•
vpn-instance policy deny
•

role default-role enable

Use role default-role enable to enable the default user role feature for remote AAA users.
Use undo role default-role enable to restore the default.
Syntax
role default-role enable [ role-name ]
undo role default-role enable
Default
The default user role feature is disabled. AAA users who do not have a user role cannot log in to the
device.
Views
System view
Predefined user roles
network-admin
Parameters
role-name: Specifies a user role by its name for the default user role. The user role must already exist. The
argument is a case-sensitive string of 1 to 63 characters. If you do not specify this argument, the default
user role is network-operator.
Usage guidelines
The default user role feature assigns the default user role to AAA-authenticated users if the authentication
server does not assign any user roles to the users. These users are allowed to access the system with the
default user role.
If AAA users have been assigned user roles, they log in with the user roles.
Examples
# Enable the default user role feature.
<Sysname> system-view
[Sysname] role default-role enable
Related commands
role

role feature-group

Use role feature-group to create a user role feature group and enter user role feature group view.
62