Help - HP FlexFabric 12900 series Command Reference Manual

Parameters
remotefile: Specifies the name of the file to be downloaded.
localfile: Specifies a name for the downloaded file.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
To save the downloaded file to the working directory accessed by the ftp command, the localfile
argument must specify a file name such as a.cfg. If you do not provide the localfile argument, the
downloaded file uses its original name.
To save the downloaded file to some other directory, the localfile argument must specify the target
directory plus the file name such as flash:/subdirectory/a.cfg. Otherwise, the command fails to take
effect.
Examples
# Download file a.txt and save it as b.txt in the working directory accessed by the ftp command.
ftp> get a.txt b.txt
227 Entering Passive Mode (10,153,116,114,11,126)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X\a.txt" file ready to send
(1 bytes) in IMAGE / Binary mode
226 Transfer finished successfully.
1 bytes received in 0.00325 seconds (308 byte/s)
# Download file a.txt to the folder test from the working directory accessed by the ftp command.
ftp> get a.txt flash:/test/b.txt
227 Entering Passive Mode (10,153,116,114,11,151)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X\a.txt" file ready to send
(6324 bytes) in IMAGE / Binary mode
226 Transfer finished successfully.
6324 bytes received in 0.0237 seconds (260.6 kbyte/s)
# In IRF mode, download file a.txt to the Flash root directory of the MPU that resides in slot 17 of member
device 1. Save the file as c.txt.
ftp> get a.txt chassis1#slot17#flash:/c.txt
227 Entering Passive Mode (10,153,116,114,11,151)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X\a.txt" file ready to send
(6324 bytes) in IMAGE / Binary mode
226 Transfer finished successfully.
6324 bytes received in 0.0237 seconds (260.6 kbyte/s)
Related commands
put

help

Use help to display all commands supported by an FTP client.
Use help command-name to display the help information of a specific command.
Syntax
help [ command-name ]
89