Switch-Fabric Isolate - HP FlexFabric 12900 series Command Reference Manual

Examples
# Set the packet statistics collection mode to queue.
<Sysname> system-view
[Sysname] statistic mode queue
Do you want to change the packet statistic mode? [Y/N]:y
Related commands
display l2vpn vsi verbose (VXLAN Command Reference)
•
• display qos queue-statistics (ACL and QoS Command Reference)
• display statistic mode
statistics enable (VXLAN Command Reference)
•

switch-fabric isolate

Use switch-fabric isolate to isolate a switching fabric module or channel.
Use undo switch-fabric isolate to restore the default.
Syntax
In standalone mode:
switch-fabric isolate slot slot-number [ channel channel-number ]
undo switch-fabric isolate slot slot-number [ channel channel-number ]
In IRF mode:
switch-fabric isolate chassis chassis-number slot slot-number [ channel channel-number ]
undo switch-fabric isolate chassis chassis-number slot slot-number [ channel channel-number ]
Default
A switching fabric module is not isolated from the forwarding plane and forwards traffic.
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a switching fabric module by its slot number.
chassis chassis-number slot slot-number: Specifies a switching fabric module on an IRF member device by
its slot number and the member ID.
channel channel-number: Specifies a switching fabric channel. If you do not specify this option, the
command isolates the entire switching fabric module.
Usage guidelines
You can isolate a switching fabric module or a channel from the forwarding plane. An isolated switching
fabric module or channel does not receive any traffic.
Isolating the only switching fabric module of the switch disables the forwarding function. If the switch has
multiple switching fabric modules, isolating a switching fabric module decreases the forwarding
242