Display Alarm - HP FlexFabric 12900 series Command Reference Manual

display alarm

Use display alarm to display alarm information.
Syntax
In standalone mode:
display alarm [ slot slot-number ]
In IRF mode:
display alarm [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays the alarm information of all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device by its slot number
and the member ID. If you do not specify this option, the command displays the alarm information for all
cards in the IRF fabric. (In IRF mode.)
Examples
# (In standalone mode.) Display alarm information.
<Sysname> display alarm
Slot Level
- ERROR
- INFO
Table 28 Command output
Field
Slot
Level
Info
faulty
# In IRF mode, display alarm information.
<Sysname> display alarm
Chassis Slot Level
1 -
1 -
1 1
2 -
Info
Fan 1 is faulty.
Power 1 is absent.
Description
Slot number of the card with an alarm. If the value is a hyphen (-), the alarm was
generated by the chassis. (In standalone mode.)
Alarm severity. Possible values include ERROR, WARNING, NOTICE, and INFO, in
descending order.
Detailed alarm information.
The card is starting up or is faulty.
Info
ERROR Chassis 1 fan 1 is faulty
INFO Chassis 1 power 6 is absent.
ERROR Chassis 1 slot 11 temperature is too high, above the warning limit.
ERROR Chassis 2 fan 1 is faulty
189