Display Current-Configuration - HP FlexFabric 12900 series Command Reference Manual

Default
Configuration encryption is disabled. The running configuration is saved to a configuration file without
encryption.
Views
System view
Predefined user roles
network-admin
Parameters
private-key: Encrypts configuration with a private key. All HP devices running Comware V7 software use
the same private key.
public-key: Encrypts configuration with a public key. All HP devices running Comware V7 software use
the same public key.
Usage guidelines
Configuration encryption enables the device to automatically encrypt a configuration file when saving
the running configuration to the file.
Examples
# Enable the public-key method for configuration encryption.
<Sysname> system-view
[Sysname] configuration encrypt public-key

display current-configuration

Use display current-configuration to display the running configuration.
Syntax
display current-configuration [ configuration [ module-name ] | interface [ interface-type
[ interface-number ] ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
configuration [ module-name ]: Displays feature configuration. The module-name argument specifies a
feature module. If no feature module is specified, this command displays all feature settings you have
made. Available feature modules depend on your configuration.
interface [ interface-type [ interface-number ] ]: Displays interface configuration, where the interface-type
argument represents the interface type and the interface-number argument represents the interface
number.
Usage guidelines
Use this command to verify the running configuration you have made.
136