Display This - HP FlexFabric 12900 series Command Reference Manual

Table 21 Command output
Field
MainBoard
Current startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file
(This file does not exist.)
Chassis x Slot n
Related commands
startup saved-configuration

display this

Use display this to display the running configuration in the current view.
Syntax
display this
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
Typically, this command does not display parameters that are set to their default settings.
For some parameters that can be successfully set even if their dependent features are not enabled, this
command displays their settings after the dependent features are enabled.
This command can be executed in any user line view to display the running configuration of all user lines.
Examples
# Display the running configuration on interface FortyGigE 1/0/1.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] display this
#
interface FortyGigE1/0/1
port link-mode route
#
Description
Displays the startup configuration files on the global active
MPU.
Configuration file that the global active MPU has started up
with.
Primary configuration file to be used at the next startup.
Backup configuration file to be used at the next startup.
If the specified next-startup configuration file has been
deleted, this comment appears next to the file name.
Displays the startup configuration files on the MPU in slot n of
IRF member x.
144