Issu Load - HP FlexFabric 12900 series Command Reference Manual

flash:/BOOT-E1133.bin
Running Version
Release 1132
flash:/SYSTEM-e1133.bin
Running Version
Release 1132
Chassis
1
1
Upgrading software images to compatible versions. Continue? [Y/N]:y
For information about the command output, see
Related commands
• issu accept

issu load

•
issu run switchover
•
issu load
Use issu load to upgrade the boot and system images of the subordinate member and configure the
upgrade images as the main startup software images for the subordinate member.
Syntax
issu load file { boot filename | system filename } * chassis chassis-number
issu load file ipe ipe-filename chassis chassis-number
Views
User view
Predefined user roles
network-admin
Parameters
boot: Specifies a boot image file.
system: Specifies a system image file.
filename: Specifies the name of a software image file in the root directory of the global active MPU's
Flash, in the format flash:/xxx.bin. It can be a case-insensitive string of 1 to 63 characters and cannot
contain slot or chassis information.
ipe-filename: Specifies the name of an .ipe file in the root directory of the global active MPU's Flash, in
the format flash:/xxx.ipe. It can be a case-insensitive string of 1 to 63 characters and cannot contain slot
or chassis information.
chassis chassis-number: Specifies the member ID of a subordinate member.
New Version
E1133
New Version
E1133
Slot Upgrade Way
16 Reboot
17 Reboot
Table 25.
177