Restore Startup-Configuration - HP FlexFabric 12900 series Command Reference Manual

If no configuration file attribute is specified, the reset saved-configuration command deletes the main
next-startup configuration file.
Examples
# (In standalone mode.) Delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 16:
Erase next configuration file successfully
# (In IRF mode.) Delete the backup next-startup configuration file.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Chassis 2 Slot 16:
Erase next configuration file successfully
Related commands
display saved-configuration

restore startup-configuration

Use restore startup-configuration to download a configuration file from a TFTP server and specify it as
the main next-startup configuration file.
Syntax
restore startup-configuration from tftp-server src-filename
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server: Specifies a TFTP server's IPv4 address or host name. The host name is a case-insensitive string
of 1 to 253 characters. Valid characters include letters, digits, hyphens (-), underscores (_), and dots (.).
src-filename: Specifies the file name of the configuration file to be downloaded.
Usage guidelines
This command is not supported in FIPS mode.
Before restoring the configuration file for the next startup, make sure the following requirements are met:
146