System-Working-Mode - HP FlexFabric 12900 series Command Reference Manual

system-working-mode

Use system-working-mode to set the system operating mode.
Use undo system-working-mode to restore the default.
Syntax
system-working-mode { advance | standard }
undo system-working-mode
Default
The device operates in standard mode.
Views
System view
Predefined user roles
network-admin
Parameters
advance: Sets the system operating mode to advanced.
standard: Sets the system operating mode to standard.
Usage guidelines
CAUTION:
Perform this command with caution. Changing the system operating mode might cause configuration loss.
In different operating modes, the device supports different features. For example:
The device supports VXLAN only when it operates in standard mode. For more information about
•
VXLAN, see VXLAN Configuration Guide.
The device supports EVI and FCoE only when it operates in advanced mode. For more information
•
about EVI, see EVI Configuration Guide. For more information about FCoE, see FCoE Configuration
Guide.
For an operating mode change to take effect, you must perform the following tasks:
Save the running configuration to the next-startup configuration file.
•
• Delete the.mdb file for the next-startup configuration file.
Reboot the device.
•
Examples
# Set the system operating mode to advanced.
<Sysname> system-view
[Sysname] system-working-mode advance
Do you want to change the system working mode? [Y/N]:y
The system working mode is changed, please save the configuration and reboot the system
to make it effective.
244