Line - HP FlexFabric 12900 series Command Reference Manual

Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
Default
The idle-timeout interval is 10 minutes.
Views
User line view, user line class view
Predefined user roles
network-admin
Parameters
minutes: Specifies the number of minutes for the idle timeout, in the range of 0 to 35791. The default is
10 minutes.
seconds: Specifies the number of seconds for the idle timeout, in the range of 0 to 59. The default is 0
seconds.
Usage guidelines
The system automatically terminates the user connection on the user line if there is no information
interaction between the device and the user within the idle-timeout interval.
Setting the idle timeout to 0 disables the idle timeout function.
This command is available in both user line view and user line class view:
• If the setting in user line view is not the default setting, the setting in user line view takes effect.
If the setting in user line view is the default setting but the setting in user line class view is not, the
•
setting in user line class view takes effect.
Examples
# Set the idle timeout to 1 minute and 30 seconds for user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] idle-timeout 1 30

line

Use line to enter one or multiple user line views.
Syntax
line { first-number1 [ last-number1 ] | { aux | vty } first-number2 [ last-number2 ] }
Views
System view
Predefined user roles
network-admin
Parameters
first-number1: Specifies the absolute number of the first user line. The value range is 0 to 65 in standalone
mode and 0 to 71 in IRF mode.
29