Parity - HP FlexFabric 12900 series Command Reference Manual

Syntax
lock
Default
By default, the system does not lock any user line.
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in FIPS mode.
After executing the lock command, enter the password for unlocking the user line and confirm the
password by entering it again.
To unlock the user line, press Enter and enter the correct password.
Examples
# Lock the current user line and then unlock it.
<Sysname> lock
Please input password<1 to 16> to lock current line:
Password:
Again:
// The user line is locked. To unlock it, press Enter and enter the password:
Password:
<Sysname>

parity

Use parity to specify a parity check mode.
Use undo parity to restore the default.
Syntax
parity { even | mark | none | odd | space }
undo parity
Default
The setting is none, and no parity check is performed.
locked !
32