Display Diagnostic-Information - HP FlexFabric 12900 series Command Reference Manual

#D/*: Disruptive test/Non-disruptive test
#P/*: Per port test/NA
#A/I/*: Monitoring test is active/Monitoring test is inactive/NA
Chassis 1 slot 16:
Name
IPCMonitor
BoardStatusMonitor
TaskMonitor
PortMonitor
ComponentMonitor
HGMonitor
EquipSelfCheck

display diagnostic-information

Use display diagnostic-information to display the operating statistics for multiple feature modules in the
system.
Syntax
display diagnostic-information [ hardware | infrastructure | l2 | l3 | service ] [ filename ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hardware: Displays hardware-related operating statistics.
infrastructure: Displays operating statistics for the fundamental modules.
l2: Displays operating statistics for the Layer 2 features.
l3: Displays operating statistics for the Layer 3 features.
service: Displays operating statistics for upper-layer features.
filename: Specifies a .tar.gz file to save the statistics to the file.
Usage guidelines
For diagnostics or troubleshooting, you can use separate display commands to collect running status
data module by module or use the display diagnostic-information command to bulk collect running data
for multiple modules.
This display command does not support the | by-linenum option, the > filename option, or the >>
filename option. However, this command asks you whether you want to save the output to a file or
display the output on the screen. The file used to save the output is automatically compressed to save
storage space.
Attributes
**M*PA
**M*PA
**M*PA
**M*PA
**M*PA
**M*PI
*O****
205
Interval
00:01:00
00:00:06
00:00:10
00:00:10
00:00:30
00:00:10
-NA-