Monitor Cpu-Usage Threshold - HP FlexFabric 12900 series Command Reference Manual

Parameters
interval-value: Specifies the CPU usage statistics sampling interval. It can take the value of 5Sec, 1Min,
or 5Min. Enter a value in its complete form. Otherwise, the system prompts parameter error.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command sets
the interval for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device by its slot number
and the member ID. If you do not specify this option, the command sets the interval for the global active
MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number. The cpu-number argument must be 0.
Examples
# Configure the interval at which the device samples CPU usage statistics as 5 seconds.
<Sysname> system-view
[Sysname] monitor cpu-usage interval 5Sec
Related commands
display cpu-usage
•
• display cpu-usage configuration
display cpu-usage history
•
monitor cpu-usage enable
•
•

monitor cpu-usage threshold

monitor cpu-usage threshold
Use monitor cpu-usage threshold to set the CPU usage threshold.
Use undo monitor cpu-usage threshold to restore the default.
Syntax
In standalone mode:
monitor cpu-usage threshold cpu-threshold [ slot slot-number [ cpu cpu-number ] ]
undo monitor cpu-usage threshold [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
monitor cpu-usage threshold cpu-threshold [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
undo monitor cpu-usage threshold [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Default
The CPU usage threshold is 99%
Views
System view
Predefined user roles
network-admin
230