HP FlexFabric 12900 series Command Reference Manual page 257

Views
Schedule view
Predefined user roles
network-admin
Parameters
at time: Specifies the execution time in the format hh:mm, where hh is in the range of 0 to 23, and mm
is in the range of 0 to 59. If you do not specify this option, the current system time is used as the execution
time.
date: Specifies the start date for the periodic schedule, in the format MM/DD/YYYY or YYYY/MM/DD.
The YYYY value is in the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value
range for DD depends on the month value. If you do not specify this argument, the execution start date
is the first day when the specified time arrives.
interval interval-time: Specifies the execution time interval in the format hh:mm or mm. This argument can
contain up to 6 characters. When in the format hh:mm, mm must be in the range of 0 to 59. When in the
format mm, this argument must be a minimum of 1 minute.
month-date [ month-day | last ]: Specifies a day in a month, in the range 1 to 31. The last keyword
indicates the last day of a month. If you specify a day that does not exist in a month, the configuration
takes effect on that day in the next month.
week-day week-day&<1-7>: Specifies one or more week days. Valid values include Mon, Tue, Wed, Thu,
Fri, Sat, and Sun. <1-7> means that you can specify 1 to 7 week days. To specify multiple week days,
separate the values with spaces.
Usage guidelines
The time repeating [ at time [ date ] ] interval interval-time command configures the device to execute a
schedule at an interval from the specified time on.
The time repeating at time [ month-date [ month-day | last ] | week-day week-day&<1-7> ] command
configures the device to execute a schedule at the specified time on every specified day in a month or
week.
The time at command, the time once command, and the time repeating command overwrite one another,
whichever is configured most recently takes effect.
Examples
# Configure the device to execute schedule saveconfig once an hour from 8:00 a.m. on.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 interval 60
# Configure the device to execute schedule saveconfig at 12:00 p.m. every day.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 12:00
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the 5th of every month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date 5
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the last day of every month.
249