HP FlexFabric 12900 series Command Reference Manual page 57

Predefined user roles
network-admin
network-operator
Parameters
name role-name: Specifies a user role name, a case-sensitive string of 1 to 63 characters. If you do not
specify a user role name, the command displays information about all user roles, including the
predefined user roles.
Examples
# Display information about the user role 123.
<Sysname> display role name 123
Role: 123
Description: new role
VLAN policy: deny
Permitted VLANs: 1 to 5, 7 to 8
Interface policy: deny
Permitted interfaces: FortyGigE1/0/1 to FortyGigE1/0/3, Vlan-interface1 to
Vlan-interface20
VPN instance policy: deny
Permitted VPN instances: vpn, vpn1, vpn2
-------------------------------------------------------------------
Rule
-------------------------------------------------------------------
1
2
3
4
5
R:Read W:Write X:Execute
Table 7 Command output
Field
Role
Description
VLAN policy
Permitted VLANs
Perm Type Scope
permit RWX feature-group abc
deny -W- feature
permit command
permit R-- xml-element
permit RW- oid
Entity
ldap
system ; radius sc *
-
1.2.1
Description
User role name.
Predefined user role names include:
•
network-admin.
•
network-operator.
•
level-n (where n represents an integer in the range of 0 to 15).
User role description you have configured for easy identification.
VLAN policy of the user role:
•
deny—Denies access to any VLAN except permitted VLANs.
•
permit (default)—Default VLAN policy, which enables the user role
to access any VLAN.
VLANs accessible to the user role.
49