Hotkey - HP FlexFabric 12900 series Command Reference Manual

CTRL_T NULL
CTRL_U NULL
CTRL_A Move the cursor to the beginning of the line.
CTRL_B Move the cursor one character to the left.
CTRL_C Stop the current command.
CTRL_D Erase the character at the cursor.
CTRL_E Move the cursor to the end of the line.
CTRL_F Move the cursor one character to the right.
CTRL_H Erase the character to the left of the cursor.
CTRL_K Abort the connection request.
CTRL_N Display the next command in the history buffer.
CTRL_P Display the previous command in the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word to the left of the cursor.
CTRL_X Delete all characters from the beginning of the line to the cursor.
CTRL_Y Delete all characters from the cursor to the end of the line.
CTRL_Z Return to the User View.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor back one word.
ESC_D Delete all characters from the cursor to the end of the word.
ESC_F Move the cursor forward one word.
Related commands

hotkey

hotkey
Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
Default
Ctrl_G: display current-configuration (display the running configuration).
•
Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•
• Ctrl_O: undo debugging all (disable all debugging functions).
Ctrl_T: No command is assigned to this hotkey.
•
Ctrl_U: No command is assigned to this hotkey.
•
Views
System view
-System-reserved hotkeys-
9