Display Transceiver Manuinfo - HP FlexFabric 12900 series Command Reference Manual

Table 40 Command output
Field
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(xx)
Digital Diagnostic
Monitoring

display transceiver manuinfo

Use display transceiver manuinfo to display the electronic label information for transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the electronic label information for the transceiver modules on all
interfaces.
Usage guidelines
This command displays only part of the electronic label information.
Description
Transceiver information.
Transceiver type.
Connector type options:
•
MPO—Multi-fiber Push On.
•
RJ-45.
•
Fiber transceiver—Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
•
Copper cable—Displayed as N/A.
Transfer distance, with "xx" representing the distance unit: km (kilometers) for
single-mode transceiver modules and m (meters) for other transceiver modules.
If the transceiver module supports multiple transfer media, the transfer distances are
separated by commas. The transfer medium is included in the bracket following the
transfer distance value. The following are the transfer media:
•
9 um—9/125 um single-mode fiber.
•
50 um—50/125 um multi-mode fiber.
•
62.5 um—62.5/125 um multi-mode fiber.
•
TP—Twisted pair.
Support for the digital diagnosis function:
•
YES—Supported.
•
NO—Not supported.
221