Line Class - HP FlexFabric 12900 series Command Reference Manual

last-number1: Specifies the absolute number of the last user line. This number cannot be smaller than
first-number1.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
first-number2: Specifies the relative number of the first user line. The value ranges are as follows:
AUX line—0 to 1 in standalone mode and 0 to 7 in IRF mode.
•
• VTY line—0 to 63.
last-number2: Specifies the relative number of the last user line. This number cannot be smaller than
first-number2.
Usage guidelines
To configure settings for a single user line, use this command to enter the user line view.
To configure the same settings for multiple user lines, use this command to enter multiple user line views.
Examples
# Enter the view of user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0]
# Enter the views of user lines VTY 0 to VTY 4.
<Sysname> system-view
[Sysname] line vty 0 4
[Sysname-line-vty0-4]
Related commands

line class

line class
Use line class to enter user line class view.
Syntax
line class { aux | vty }
Views
System view
Predefined user roles
network-admin
Parameters
aux: Specifies the AUX line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
30