Ftp Client Source - HP FlexFabric 12900 series Command Reference Manual

Parameters
ftp-server: Specifies the IPv4 address or host name of an FTP server. A host name can be a
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The default
value is 21.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the remote host belongs, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the remote host belongs to the public
network, do not specify this option.
dscp dscp-value: Specifies the DSCP value for IPv4 to use in outgoing FTP packets to indicate the packet
transmission priority, in the range of 0 to 63. The default is 0.
source { interface interface-type interface-number | ip source-ip-address }: Specifies the source address
used to establish the FTP connection.
• interface interface-type interface-number: Specifies an interface by its type and number. The
primary IPv4 address of this interface will be used as the source address for outgoing FTP packets.
If no primary IPv4 address is configured on the source interface, the connection cannot be
established.
ip source-ip-address: Specifies an IPv4 address. This address must have been configured on the
•
device.
Usage guidelines
This command is only applicable to IPv4 networks.
If no parameters are specified, this command enters the FTP client view without logging in to the FTP
server.
If the server parameters are specified, you are prompted to enter the username and password for logging
in to the FTP server.
Examples
# Log in to the FTP server 10.153.86.57, and specify the source IPv4 address for outgoing FTP packets as
10.153.1 16.1 14.
<Sysname>ftp 10.153.116.114 source ip 10.153.86.57
Press CTRL+C to abort.
Connected to 10.153.116.114 (10.153.116.114).
220-
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User (10.153.116.114:(none)): cs
331 Give me your password, please
Password:
230 Logged in successfully
Remote system type is MSDOS.
200 Type is Image (Binary)
ftp>

ftp client source

Use ftp client source to specify the source IPv4 address for outgoing FTP packets.
87