Permit Interface - HP FlexFabric 12900 series Command Reference Manual

Views
User role view
Predefined user roles
network-admin
Usage guidelines
To restrict the interface access of a user role to a set of interfaces, perform the following tasks:
1. Use interface policy deny to enter user role interface policy view.
2. Use permit interface to specify accessible interfaces.
NOTE:
The interface policy deny command denies the access of the user role to all interfaces if the permit
interface command is not configured.
To configure an interface, make sure the interface is permitted by the user role interface policy in use. You
can perform the following tasks on an accessible interface:
Create, remove, or configure the interface.
•
Enter the interface view.
•
• Specify the interface in feature commands.
The create and remove operations are available only for logical interfaces.
Any change to a user role interface policy takes effect only on users who log in with the user role after the
change.
Examples
# Enter user role interface policy view of role1, and deny role1 to access any interface.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] interface policy deny
[Sysname-role-role1-ifpolicy] quit
# Enter user role interface policy view of role1, and deny role1 to access any interface except FortyGigE
1/0/1 to FortyGigE 1/0/5.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] interface policy deny
[Sysname-role-role1-ifpolicy] permit interface fortygige 1/0/1 to fortygige 1/0/5
Related commands
display role
•
•

permit interface

role
•
permit interface
Use permit interface to configure a list of interfaces accessible to a user role.
Use undo permit interface to disable the access of a user role to specific interfaces.
56