Copy - HP FlexFabric 12900 series Command Reference Manual

<Sysname> cd flash:/

copy

Use copy to copy a file.
Syntax
copy fileurl-source fileurl-dest
Views
User view
Predefined user roles
network-admin
Parameters
fileurl-source: Specifies the name or URL of the file to be copied. If the file resides on an FTP or TFTP server
rather than on the device, specify the URL of the file. Whether a URL is case sensitive depends on the
server.
fileurl-dest: Specifies the name or URL of the destination file or directory. To copy the source file to an FTP
or TFTP server, specify a URL. If you specify a directory, the device copies the specified file to the directory
and saves it with its original file name. Whether a URL is case sensitive depends on the server.
Usage guidelines
You can use the copy command to perform the following operations:
• Copy a local file and save it locally.
Copy a local file and save it to an IPv4 FTP or TFTP server.
•
Copy a file on an IPv4 FTP or TFTP server and save it locally.
•
To specify a file or directory, use the following guidelines:
Location
On the device
On an FTP server
On a TFTP server
Examples
# Copy the test.cfg file in the current folder and save it to the current folder as testbackup.cfg.
<Sysname> copy test.cfg testbackup.cfg
Copy flash:/test.cfg to flash:/testbackup.cfg?[Y/N]:y
Name format
Use the file name guidelines in
Fundamentals Configuration Guide.
Enter the URL in the format ftp://FTP
username[:password]@server
address[:port number]/file path[/file
name].
Enter the URL in the format
tftp://server address[:port
number]/file path[/file name].
Remarks
N/A
The username and password must be the same as
those configured on the FTP server. If the server
authenticates users only by the username, you are
not required to enter the password.
For example, to use the username 1 and password
1 and specify the startup.cfg file in the authorized
working directory on FTP server 1.1.1.1, enter the
URL ftp://1:1@1.1.1.1/startup.cfg.
For example, to specify the startup.cfg file in the
working directory on TFTP server 1.1.1.1, enter
the URL tftp://1.1.1.1/startup.cfg.
113