Password; Access Levels - Siemens SINUMERIK 808D Commissioning Manual

Table 4- 2 Description of the LED status
Status LED 1
RDY/JOG
Green LED
Dark Dark
Dark Flashing at 1 Hz
Green Dark
Dark Red
Green Red
Flashing at 1 Hz Dark
4.5

Password

4.5.1

Access levels

Purpose
Access levels/passwords are necessary to prevent system data damages caused by
unexpected mistake operations.
Cases
You must set a password for an access level under following cases:
● Data restoring
● Software update
● Password has been deleted
● A higher or lower access level is required
Access levels
The SINUMERIK 808D provides a concept of access levels for enabling data areas. You can
view such information from the table below:
Table 4- 3
Manufacturer
Customer
No password
Commissioning Manual
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Status LED 2
ERR
Red LED
No 24 V DC Input/Drive Defect
Drive not ready
Drive ready
Drvie error
Initialization
JOG mode
Access level
Access level
SUNRISE
CUSTOMER
-
Switching on and preparing for commissioning
Description
Dark
Current status
Depends on the current menu opera-
tion
Alarm code
Display "8.8.8.8.8.8."
Display "J-run"
Default password
4.5 Password
7-segment LED display description
Target group
OEMs
End users
-
33