4.7
Introduction to the onboard assistants
The SINUMERIK 808D system software has three onboard assistants:
● Startup assistant (requires "Manufacturer" access level)
This on-board assistant is designed to help you commission the prototype. With this
assistant, you can complete basic machine tool functions.
● Series assistant (requires "Manufacturer" access level)
This on-board assistant is designed to help you correctly finish the series machine
commissioning.
● Operation assistant (requires "Customer" access level)
This onboard assistant is designed to help you learn about the basic operations of the
machining process.
Where can I find the assistants?
Press the <MENU FUNCTION> key on the PPU to call the assistants:
Commissioning Manual
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Switching on and preparing for commissioning
4.7 Introduction to the onboard assistants
37