4.3
MCP mode changeover
Use the machine control panel (MCP) to make changeover between the JOG mode, the Ref
Point mode, the AUTO mode and the MDA mode.
The MCP key layout is shown below:
Legend
①
②
③
④
Commissioning Manual
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Name
Description
Mode navigation
keys
Incremental feed
keys
Axis traversing keys
Move an axis (X, Y, Z)
RESET key
•
•
Switching on and preparing for commissioning
Enters the Ref. Point mode for reference point approach
Enters the JOG mode (manual operation)
Enters the AUTO mode (automatic operation)
Enters the MDA mode (manual program input and auto-
matic execution)
Axis traverses at the increment of 1
Axis traverses at the increment of 10
Axis traverses at the increment of 100
Resets NC programs
Cancels alarms
4.3 MCP mode changeover
31