Using The Oem Startup Screen And The Oem Machine Logo - Siemens SINUMERIK 808D Commissioning Manual

Other frequently used functions

9.3 Using the OEM startup screen and the OEM machine logo

9.3 Using the OEM startup screen and the OEM machine logo
The SINUMERIK 808D uses the SIEMENS start-up screen and machine logo by default. If
necessary, you can use you own start-up screen and machine logo.
Using the OEM startup screen
The default start-up screen is shown below:
To change it to your own start-up screen, proceed as follows:
1. Prepare the image of the start-up screen and save it on a USB stick.
The SINUMERIK 808D supports a start-up screen in the BMP format and with a
maximum size of 640*480 pixels (W*H).
Name the image as "startup.bmp".
2. Insert the USB stick into the USB interface at the front of the PPU.
3. Press softkeys "Sys. data" > "USB" in the "SYSTEM" operating area. Find the start-up
screen file and copy it with the "Copy" softkey.
4. Press the "808D data" softkey. Press the <INPUT> key to enter "HMI data" > "Custom-
ized bitmaps".
The default start-up screen and machine logo are placed under the "Customized bitmaps"
folder:
– OEM machine logo (mtbico.bmp)
– OEM start-up splash screen (startup.bmp)
Press the "Paste" softkey to replace the default startup screen with your own start-up
screen.
86
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Commissioning Manual