Series production
8.3 Data backup
8.3.2
Creating an original status archive
To create an original status archive, proceed as follows:
1. In the "SYSTEM" operating area (key combination:
softkey.
2. Select the option of "Create start-up archive in the default directory" and press the "OK"
softkey:
1. In the "Archive information" box that follows, you can enter the information below:
– Archive creator
– Archive version
– Comment
2. Press the "OK" softkey to create the data archive.
8.3.3
Creating the start-up archive
When creating the start-up archive for the series production, follow exactly the same
procedures used to create the start-up archive for the prototype. Refer to the section
"Creating a start-up archive for the prototype (Page 71)" for details.
78
+
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
), press the "Archv."
Commissioning Manual