Other Frequently Used Functions; Playing A Slide Show - Siemens SINUMERIK 808D Commissioning Manual

Other frequently used functions

9.1

Playing a slide show

The SINUMERIK 808D has a function of playing a slide show. You can create a slide show
to display your product information.
Playing a slide show
You can press the key combination <CTRL> + <D> on the PPU to show a slide show and
press the key combination again to exit the slide show.
Creating a slide show
By default, the slide show of Siemens product information is provided. You can create the
desired slide show as follows:
1. Prepare your own slides and save them in the respective language folders on a USB
stick. Name each folder according to the following convention.
Chinese: folder name = "chs";
English: folder name = "eng";
Portuguese: folder name = "ptb";
Russian: folder name = "rus".
The SINUMERIK 808D supports two kinds of image formats:
– *.png
– *.bmp
Image size is recommended to be 640*480 pixels for the best display effect.
Name each slide according to the following syntax:
– slide%u.png or
– slide%u.bmp
Here "%u" is the number sequence starting with "1". For example, slide1.png, slide2.png,
slide3.png ...
If your slides include both PNG-format images and BMP-format images, then number
them separately. During the slide show, the PNG-format images will have a higher priority
over the BMP-format images.
2. Insert the USB stick into the USB interface at the front of the PPU.
Commissioning Manual
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
9
81