Siemens SINUMERIK 808D Commissioning Manual page 8

Delivery check
The following diagram shows a system configuration example for the SINUMERIK 808D
control system:
Figure 1-1 SINUMERIK 808D control system overview (taking a milling machine for an example)
11), 12), 13): For detailed information on cable shield connection, refer to Section "Connecting according to the default PLC
program (Page 22)".
8
10)
11)
12)
1)
2)
Note:
The following devices in this diagram
are not standard system components:
- PC
- USB
- Handwheel
- +24VDC power supply
- Inverter or servo spindle drive
- Spindle motor
- Spindle encoder
13)
4)
5)
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
3)
Commissioning Manual