Data Settings For Individual Machine; Setting The Software Limit Switches; Setting The Backlash; Making Leadscrew Error Compensation - Siemens SINUMERIK 808D Commissioning Manual

8.2

Data settings for individual machine

8.2.1

Setting the software limit switches

Refer to the section "Setting the software limit switches (Page 64)".
8.2.2

Setting the backlash

Refer to the section "Setting backlash compensation (Page 64)".
8.2.3

Making leadscrew error compensation

Refer to the section "Making leadscrew error compensation (Page 65)".
8.3

Data backup

8.3.1

Overview

After the series production, you can do the data backup of individual machine for delivery in
two ways:
● Creating an original status archive: data backup only on the CNC controller
● Creating a start-up archive: data backup either on the CNC controller or on an external
USB stick
The original status archive and the start-up archive contain exactly the same data:
● Machine and setting data
● Compensation data
● PLC data (for example, PLC program and PLC alarm texts)
● User cycles and part programs
● Tool and work offset data
● R-parameter
● HMI data (for example, OEM Online Help and OEM Manual)
Commissioning Manual
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Series production
8.2 Data settings for individual machine
77