Siemens SINUMERIK 808D Commissioning Manual page 76

Series production
8.1 Uploading the series archive for series commissioning
4. Check the archive information and press the "OK" softkey to proceed if the selected data
archive is correct:
5. Press "OK" to confirm the warning information:
6. Now the upload begins:
It will take you several minutes to complete the upload.
7. The CNC controller restarts after successfully uploading the production archive.
Note
Successfully uploading the data archive can delete the password. You must set the
password again in the "SYSTEM" operating area.
76
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Commissioning Manual