Connecting According To The Default Plc Program - Siemens SINUMERIK 808D Commissioning Manual

Connecting

3.3 Connecting according to the default PLC program

3.3 Connecting according to the default PLC program
The SINUMERIK 808D has integrated with a default PLC application. If you perform the
commissioning work with the default PLC application, perform wiring as follows.
Connecting the digital inputs and outputs
Figure 3-3 Connecting the digital inputs and outputs (Milling)
22
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Commissioning Manual