Connecting External Devices
Thermo Scientific
This chapter describes how to make the contact closure connection to external devices.
External devices include devices controlled or not controlled from the Xcalibur data system.
Table 4
lists the Xcalibur kits for various external devices.
Contents
•
External Devices Controlled by the Xcalibur Data System
•
External Devices Not Controlled by the Xcalibur Data System
Table 4. Xcalibur kits for various external devices
Part Number / Kit
OPTON-21705
OPTON-21709
OPTON-21710
OPTON-21721
OPTON-30018
Description of Kit
Xcalibur contact closure kit (for devices not controlled by
Xcalibur)
• 2-wire trigger cable
• 8-position screw connector
Xcalibur Additional 4-Port Serial Kit
• 4-port serial PCB (PCI) and software
• Quad DB9 male adapter
Xcalibur Waters Interface Kit
• Waters serial I/F cable
• 2-wire trigger cable (contact closure)
Xcalibur SS420x Interface Kit
• SS420x main unit
• Serial cable
• 2-wire trigger cable (contact closure)
• Power supply
Xcalibur Additional 4-Port Serial Kit
Xcalibur JetDirect™ Ethernet Control Kit
• Contact closure PCB
• External contact closure cable
• Ethernet 10 Base-T cable (2)
• 10/100 Autosensing 8-port Ethernet switch
• HP JetDirect 400N PCB
4
LTQ Series Getting Connected Guide
23