Connecting the MALDI LTQ XL Vacuum System
Thermo Scientific
The information provided in this topic is not intended as a guide on how to install the
vacuum system. Do not attempt to install the vacuum system without the appropriate
training provided by a Thermo Fisher Scientific field service engineer.
CAUTION Only Thermo Fisher Scientific field service engineers or personnel who have
received equivalent training from Thermo Fisher Scientific on installing the MALDI
source can connect the forepumps to the MALDI LTQ XL system.
Table 2
lists the kits and assemblies that contain the parts required to connect the external
vacuum system to the MALDI LTQ XL system.
MALDI solenoid vacuum valve and vacuum hose assembly.
Table 2. Kits required to connect the external vacuum system
Description
Mechanical pump kit
Hose and accessories kit
MALDI solenoid vacuum valve and vacuum hose assembly
(contains the plug that terminates the extra section of vacuum hose)
Figure 7.
MALDI solenoid vacuum valve assembly
Centering ring
Clamp
Solenoid vacuum valve
Figure 7
Adapter
Hose clamp
3
Connecting the MALDI LTQ XL System
Connecting the MALDI LTQ XL Vacuum System
shows the components of the
Part number
70111-62014
97055-62007
97155-60088
Adapter
Hose clamp
Vacuum hose
LTQ Series Getting Connected Guide
15